|
Dynamode Support Centre
Support - ADSL
Devices
Identification
Please ensure that you have correctly identified the product you require
support for.
Drivers
Setup Notes
The following notes may help you configure your adsl modem. Some of the
notes assume some previous knowledge. Please refer to supplied documentation
for additonal information.
- Quick guide to configuring the m-adsl-usb-c
Ensure your computer is running the lastest service packs and updates
and there are no devices or software that may conflict with the adsl
modem.
The drivers for this device need to be installed before you plug in
the adsl modem. If you have a driver cd, insert it into your cd drive
it will autoplay, then select the install driver option. If you are
using the downloaded driver, run setup.exe after extracting the zip
file.
During the installation you will be asked to confirm some settings.
Unless told otherwise by your ISP your settings in the UK will be as
shown below:
| |
VPI |
VCI |
Protocol |
| PPPoA |
0 |
38 |
VCMux |
Follow the onscreen prompts, confirming when necessary and then reboot
the computer when complete. Restart the computer and connect the ADSL
USB Modem via the usb cable, connecting the ADSL line to the device
as well. The installation will continue, and when finished you will
be left with a dialup icon on your desktop. Enter your username and
password carefully, and click connect. You should now be connected to
the internet.
|