Dynamode Support Centre

Support - ADSL Devices

M-ADSL-USB-C50
Dynamode USB ADSL Modem.

Identification

Please ensure that you have correctly identified the product you require support for.

Drivers

os Windows    
download 98 ME 2000 XP      

Setup Notes

The following notes may help you configure your adsl modem. Some of the notes assume some previous knowledge. Please refer to supplied documentation for additonal information.

  • Quick guide to configuring the m-adsl-usb-c50
    Ensure your computer is running the lastest service packs and updates and there are no devices or software that may conflict with the adsl modem.
    Power down the computer and connect the C50 to the computer with the adsl line connected to the modem. Boot up the computer and on loading windows you should be presented with a New Hardware wizard. Follow the onscreen prompts, inserting the driver CD (or path to where you have extracted the downloaded driver) when necessary. Unless you have been told other wise by your ISP, you'll be installing the Wan driver (PPPoA). After the install has finished you will have AccessRunner icons on your desktop. By running the AccessRunner control panel you can check the settings for your modem. (Advanced settings can be reached by pressing ALT-P or CTRL-P in the control panel.) You should ensure the following UK settings under the Protocol tab:


    VPI VCI Protocol
    0 38 PPPoA VC Mux

    When that has been checked, close the control panel and open the AccessRunner dialup icon from the desktop. Enter your username and password (exactly as given by your ISP). Once you have entered your information you are ready to connect to the internet.